-
Pull wires from basement
to an attic in a two story house without
drywall damage.
-
Easily and quickly
locate reference points from
floor-to-floor, or ceiling to attic.
No need to drill through carpeting or
flooring surface.
-
Make a 90�
pull from a wall into a blind ceiling
when using the Remote Release Tool.
-
Go through
a very small wire fishing hole (as small
as 7/16" diameter) doing minimal
structural damage.
-
Reach
spaces inaccessible to the installer,
such as under a trailer or the outside
wall of a low ceiling attic when using
the Automatic Release Tool.
-
Easily add
wiring to an existing wall outlet or
switch (steel or plastic).
-
Use as a
compass when suspended from the pulling
string.
-
Use Pulling
Magnet without scratching walls.
|
-
Install surround sound
wiring (or any other signal wiring) from
TV location to any speaker location with
only a small 7/16" hole placed in
drywall hidden directly behind speakers.
-
Go from a basement to
the center of a first floor room of a
2-story house to install a fixture that
was not previously wired, without doing
damage to wall or ceiling. (By doing a
90�
transition from wall to ceiling.)
-
Use String
Magnet as a plumb bob when the eyelet is
suspended from the fishing string,
eliminating the need for a heavy
commercial plumb bob.
-
With a
rapid "zig-zag" motion at a slow rate of
advance, this tool works well in
insulated spaces.
-
Store in a
convenient and sturdy storage tube.
-
Make last
minute changes in new construction.
-
Kit
includes a DVD training video.
|
