Welker Wall Snake
Original Tool Kit

Large External Pulling Magnet This Large Pulling Magnet is used to grasp the String Magnet through the wall surface. With the two magnets now locked together, the inner String Magnet can be moved from one access hole to another access hole by moving the Large Pulling Magnet along the outer surface of the wall. The Pulling Magnet is encased in a piece of white Teflon® allowing the magnet to be used on a painted or wallpapered surface without scratching or marring the surface.

Insertion Tool

This insertion tool is used to insert any of the String Magnets into the wall through a small access hole where it can easily be grasped through the wall surface by the Large Pulling Magnet.

This tool is ideal when working in older homes where metal access boxes were used. If you try to accomplish this task without the Insertion Tool, you will encounter a problem with the String Magnet grasping onto the metal box and making it virtually impossible to properly place the String Magnet inside the wall.

This bendable insertion tube holds the magnet in a non-magnetic plastic tube, allowing the installer to guide the String Magnet through the knock-out hole in the metal box to a desired location inside the wall. The String Magnet can now be grasped by the Large Pulling Magnet placed against the outer surface of the wall.

Pulling Cord

This specially designed 12 ft. Pulling Cord (stored on one of the wind up devices) is equipped with a steel eyelet for ease in attaching wires to be pulled from one access point to the other. The Pulling Cord also has a special patent pending design, allowing for the pulling of wires when doing a sharp 90° transition. (i.e. from ceiling to wall)

String Magnets

These String Magnets are a key component of the Welker Wall Snake Kit. These magnets act as a carrying device to move a pulling string from one access hole to the other. On the far end of the string is an electrical connection eyelet. The eyelet makes it easy to attach a wire-pulling cord or a wire to the end of the magnet string.

String Magnet Manipulating Tools

These unique tools are made of a copper coated steel wire designed to manipulate the String Magnet in a blind space such as a ceiling. (The smaller being of a 1/16
inch dia. and the larger being of a 3/32 inch dia.). When making a 90° pull from the ceiling to a wall access hole, these tools can be utilized. They can also be used to move the string magnet over a dividing wall, through a firestop, or jump over a ceiling cross support, such as a 2x4. This would otherwise be impossible to do without significant damage to the wall or ceiling.

These tools can be bent to accommodate the job at hand.

Retrieving Tool

This retrieving tool is made of a copper coated steel rod and a small steel bolt . It is
used to retrieve the last few inches of the String Magnet from the inside of the wall to complete the string-pull from the starting access hole to the second access hole. The rod can be bent to accommodate the job being done. 

The rod can be bent to accommodate the job being done.

String Magnet and Pulling Cord Windup Storage Tools

This windup storage tool was constructed with holes on either end so when held with the thumb and middle finger and allowed to spin, the string is not twisted or knotted by the unwinding action. There are screws embedded in the block to provide a magnetic latch for the string magnet and the steel eyelet.

Carrying Case

This storage tube is uniquely designed to hold all the components of the Welker Wall Snake Kit except the Telescoping Prop. Separate compartments allow for easy separation of magnets from metal rods. Virtually indestructible and fits nicely behind a seat at only 1 1/2 inches inside diameter.

Bonus Surround Sound Release Tool

Crafted from high quality plastic and stainless steel, the Surround Sound Release Tool allows for easy insertion of the Pulling String, and instant capture from the Large External Pulling Magnet.

Bonus Surround Sound Pulling String

The Surround Sound Pulling String acts as a guide, to pull the speaker wire to a pre-drilled hole in the wall.  The Pulling String also features a small but powerful magnet, easy storage utility, and a "no-break" guarantee.